What Different Have On The sand Ice Maxhine vs The Mixer

What Different Have On The sand Ice Machine vs The Mixer

 

 

What Different Have On The sand Ice Maxhine vs The Mixer

 

The sand ice machine is not the same as the mixer:

Sand ice machine:

Sand ice machine is specially made for making smoothies, cocktails, chilled cappuccino, sorbet, milkshake, yogurt, sprite strawberry ice, rich banana milkshake, coconut pineapple ice, orange honey papaya smoothie, fresh Small appliances such as smoothies provided by ice drinks such as fruit sand ice.

Different sand Ice Maxhine vs The Mixer

The sand ice machine is based on the principle of high-speed collision cutting to sand the ice into a soft smoothie. Due to the characteristics of the super high speed of the motor, the heat is large, so it can not be stirred for a long time, and the time is long. Therefore, the heat generated after grinding is very large, and the continuous grinding for a long time causes the automatic protection function of the motor. The protection function of the motor is characterized by automatic shutdown during the mixing process, and other switches lose their function. It needs to be reset by the protection switch on the back of the machine to work again (the protection switch is behind the machine head, there is a plastic sleeve, when the machine is automatically protected, there will be a plastic rod popping up, and the plastic rod will be pressed back again when reset). Multiple motor protection switches are tripped, indicating that the motor load is too large, and it is necessary to wait for the motor to cool before continuing to use, otherwise it will cause great wear on the motor.

Mixer:

What Different Have On The sand Ice Maxhine vs The Mixer

A blender is a machine in which a shaft with a blade rotates in a cylinder or a tank to mix and mix a plurality of materials to make a mixture or a suitable consistency. Mixers are divided into a variety of types, including forced mixers, single-shaft mixers, twin-shaft mixers, and so on. Note: Mixers and automatic feeders must be cleaned inside, especially in winter, which will extend the life. The mixer is a mixer, because the usual function of the mixer is to mix and mix all kinds of dry powder mortar, so it is commonly called a mixer.

Different sand Ice Maxhine vs The Mixer

The mixer is determined by a number of parameters, and it is not possible to describe a mixer with any single parameter. Shaft power
(P), blade discharge
(Q), head
(H), blade diameter
(D), and agitation speed
(N) are five basic parameters that describe a mixer.

The discharge volume of the blade is proportional to the flow rate of the blade itself, the primary of the blade rotation speed and the cube of the blade diameter. The shaft power consumed by the agitation is proportional to the specific gravity of the fluid, the power level of the blade itself, the third of the rotational speed and the fifth power of the blade diameter. In the case of a certain power and blade form, the bucket discharge

 

What Different Have On The sand Ice Maxhine vs The Mixer

Different sand Ice Maxhine vs The Mixer

(Q) and the head
(H) can be adjusted by changing the matching of the diameter
(D) and the speed
(N) of the blade, ie the large diameter blade A mixer with low speed

(with constant shaft power) produces a higher flow and a lower head, while a small diameter blade with a higher speed produces a higher head and lower flow. In the agitation tank, the only way to cause the micelles to collide with each other is to provide a sufficient shear rate. From the stirring mechanism, it is precisely because of the difference in fluid velocity that the fluid layers are mixed with each other.

 

Different sand Ice Maxhine vs The Mixer

 

What Different Have On The sand Ice Maxhine vs The Mixer

 

Therefore, the stirring process always involves the fluid shear rate. Shear stress is a force that is the real cause of bubble dispersion and droplet breakage in agitation applications. It must be pointed out that the shear rate of the fluid at each point in the entire agitation tank is not uniform. Studies on the shear rate distribution show that there are at least four shear rate values ??in a stirred tank. They are: experimental studies have shown that, in the case of the paddle zone, no matter what type of pulp, when the blade diameter is constant Both the maximum shear rate and the average shear rate increase with increasing speed. However, when the rotational speed is constant, the relationship between the maximum shear rate and the average shear rate and the diameter of the blade is related to the slurry type. When the speed is constant, the maximum shear rate of the radial blade increases with the increase of the blade diameter, and the average shear rate is independent of the blade diameter. These concepts regarding the shear rate of the paddle zone require special care in the mixer’s shrinking and amplifying design. Small tank mixers tend to have high speed

Different sand Ice Maxhine vs The Mixer

(N), small blade diameter
(D) and low tip speed
(ND) compared to large tanks, while large tank mixers tend to have low speed
(N) Features such as blade diameter
(D) and high tip speed  

Be the first to comment

Leave a Reply

Your email address will not be published.


*