How to operate the bubble water machine / soda machine
Introductions Of How to operate the bubble water machine
Step by step
The bubble water and the soda water taste roughly the same, and the carbon dioxide bubbles contained in the liquid can be observed by the naked eye,how to operate the bubble water machine , but the two principles are completely different. Soda water is made from baking soda powder, which is sodium bicarbonate (NAHCO3). When it is mixed with water, it produces carbon dioxide gas and also produces a large amount of sodium. If the body consumes a lot of sodium, the concentration of sodium ions in the body will be too high. how to operate the bubble water machine, This is why it is not recommended to have too little gastric acid secretion and a large amount of soda water in patients with hypertension. The bubble water is a powerful pressure applied by the bubble water machine, and only the food-grade carbon dioxide gas is pressed into the water, and the bubble water is purer than the soda water which generates a large amount of sodium.
Bubble water is sugar-free, how to operate the bubble water machine .cool and refreshing, and can be blended with syrup to prepare a variety of flavors such as lemon, lime, raspberry, etc., and the price is not expensive, so it becomes the new favorite of people under 40 years old, especially young people. Bubble water contains carbonic acid, which can form carbon dioxide in the human body, which can dissipate body heat, and the feeling of coolness is also good for restoring fatigue. In Japan, there is a new saying that bubble water can lose weight.
After the introduction of the above bubble water, the following teaches everyone how to operate the bubble water machine correctly.
1 set of bubble water machine,
1 bottle of food grade carbon dioxide,
1 PET water bottle.
Method / step
1 .Prepare a bubble water machine,
1 food grade carbon dioxide,
1 PET water bottle.
2 .The specific steps and methods are as follows
3. How to operate the bubble water machine/soda machine operation steps
4 . Since this bubble water machine belongs to manual pressure relief, press the airing button for 2-3 seconds, then release the airing button, then press the air release button, and press the air release button for 2 seconds to allow the bubble water machine to fully relieve pressure. After the pressure relief is completed, the water bottle can be quickly removed. (If you press the air release button, the PET water bottle is not removed for a long time. When the water bottle is removed from the bubble machine again, you need to press the air release button again, and then quickly remove the PET water bottle.) . As shown in the figure, the effect after pumping and after deflation
How to operate the bubble water machine/soda machine operation steps
Do not pour boiling water or hot water with a temperature greater than 40 degrees into the PET water bottle to avoid damaging the PET water bottle.
After the bubble water machine is pumping, do not forget to press the air button to vent to avoid damage to the machine.
If you do not remove the PET water bottle after pressing the air release button for a long time, and then remove the water bottle from the bubble machine again, you need to press the air release button again, and then quickly remove the PET water bottle. Because the water bottle is not taken for a long time, the bubble water in the water bottle will be removed. Some of the gas is released from the water and will form a gas pressure. Therefore, if the water bottle is not taken for a long time, when the water bottle is taken again, it is necessary to press the gas release button again to take the water bottle.how-to-operate-the-bubble-water-machine